The company can customize the production of various styles of mirror stainless steel plate, welcome to send an email to ask me
Stainless steel mirror panel, also known as mirror panel, is polished on the surface of the stainless steel panel with abrasive liquid through polishing equipment, so that the luminosity of the panel surface is as clear as a mirror. Uses: Mainly used in building decoration, elevator decoration, industrial decoration, facility decoration and other stainless steel products.
There are many mirror panels, the main products are: stainless steel coil, thick plate, medium and thick plate, ultra-thin plate, stainless steel mirror panel, decorative plate, stainless steel pattern plate; stainless steel plate surface is smooth, with high plasticity, toughness and mechanical strength, corrosion resistance of acid, alkaline gas, solution and other media.
The principle of stainless steel plate production is that the stainless steel raw material is polished on the surface of the steel plate with a polishing liquid using a polishing equipment, so that the surface of the plate is flat and the luminosity is as clear as a mirror. Stainless steel mirror panel products are widely used in building decoration, elevator decoration, industrial decoration, facility decoration and other decoration projects.
304 stainless steel plate: thickness (mm) X width (m) X length (m) X 7.93g/cm3
316 stainless steel plate: thickness (mm) X width (m) X length (m) X 7.98g/cm3
430 stainless steel plate: thickness (mm) X width (m) X length (m) X 7.70g/cm3
The processing and production process of stainless steel mirror panels can be divided into two methods: general grinding and fine grinding. So which of these two processing methods has a better mirror effect? And this is judged by looking at the brightness of the mirror surface, and the sand holes and grinding head flowers on the surface of the sheet must be less. Generally speaking, when the stainless steel plate is processed on a polishing machine, the slower the speed of travel, the more groups of grinding, and the effect will be very good; when the stainless steel plate is processed by polishing equipment, the first is to correct the The plate is sanded, and then the stainless steel plate is put into the grinding liquid. Among them, 8 groups of grinding heads with different thicknesses are used for grinding. The grinding process is basically the treatment of the surface of the stainless steel plate. This process has no depth at all. This step is mainly for the purpose of remove the oxide layer on the surface of the stainless steel plate. After the above process is completed, it can be washed and dried. The color stainless steel mirror panel is recolored on the basis of the stainless steel mirror panel. Now the high-grade color stainless steel mirror panel is processed by vacuum ion plating technology. Even pattern etching can be done on the mirror panel, resulting in a variety of patterns and styles of pattern etched plates.
Related products
-
High quality stainless steel rectangular tube
Testing method for hardness of stainless steel pipe There are two main types of mechanical properties testing methods, one is tensile test and the other is hardness test. The tensile test is to make a stainless steel pipe into a sample, pull the sample to break on a tensile testing machine, and then measure one or more mechanical properties, usually only the tensile strength, yield strength, elongation after fracture and are m...
-
201 202 310S 304 316 Decorative welded polished...
Products Type Classification of threaded pipes: NPT, PT, and G are all pipe threads. NPT is a 60° taper pipe thread that belongs to the American standard and is used in North America. National standards can be found in GB/T12716-2002m. PT is a 55° sealed tapered pipe thread, which is a type of Wyeth thread and is mostly used in European countries. The taper is 1:16. National standards can be found in GB/T7306-2000. (Mostly use...
-
Stainless Steel Industrial Pipe Manufacturer
The difference between industrial pipe and decorative pipe 1. Material Stainless steel decorative pipes are generally used indoors and are generally made of 201 and 304 stainless steel. Outdoor environments are harsh or coastal areas will use 316 material, as long as the environment used is not easy to cause oxidation and rust; industrial pipes are mainly used for fluid transportation, heat exchange, etc. Therefore, the corros...
-
Stainless steel hexagon bar
Product Features 1)Product: stainless steel hexagon bar 2)Type: round bar, square bar, flat bar, hexagon bar 3)Grade: 201, 202, 304, 316, 316L,410, 430 4)Standard: JIS, AISI, ASTM, GB, DIN, EN, SUS 5)Length of bar: from 3000mmm-6000mm or as required 6)Surface: Black,Bright, Pickled, Hair line, Brushed, Polished, Peeled, Sanblasting. 7)Technique: cold drawn, hot rolled, forged 8)Tolerance: ±0.05mm(diameter); ±0.1mm(length) 9)Pa...
-
The company can customize the production of var...
Corrosive Conditions 1. On the surface of stainless steel, there are deposits of dust or heterogeneous metal particles containing other metal elements. In humid air, the condensed water between the deposits and the stainless steel connects the two into a micro-battery, which triggers an electrochemical reaction , the protective film is damaged, called electrochemical corrosion. 2. Organic juices (such as vegetables, noodle so...
-
Stainless steel angle bar
Product Features 1)Product: stainless steel angle bar 2)Steel grade:201,202,301,304,304L,316,316L,410,430 3)Standard: ASTM,SUS,GB, AISI,ASME, EN, BS, DIN, JIS etc 4)Product range: stainless steel angle bar/round bar, flat bar/square bar/hexagon bar 5)Surface: pickled, black, bright, polishing, blasting etc. 6)201/202/304/321/316 etc stainless steel angle bar in stock and theoretical weight table 7)Angle bar Size: ∠10mmx10mm-∠1...
